Radiator grill chrome moulding trim Nissan Qashqai +2 08-10/+2 phase 2 10-14/+2 phase 3/07-10...

£22,78
Add to cart
Visible
Compatibility
Description
This radiator grill chrome moulding trim strip attaches to the fins of the front bumper grill of the car, in order to add a chrome finish to it. It will enhance the entire front bumper of the vehicle by highlighting it with a touch of chrome. This item can fill the entire radiator grill, and is not limited to a single strip.

Warning: this is a roll of Universal chrome strip to be cut/adjusted by yourself. The product is specially designed so it can be trimmed very easily, which gives a perfect and specific finish to your vehicle. You can cut the strips using a pair of scissors (mounting is not difficult, and does not require knowledge/special tools).

The back of the chrome strip is covered with a 3M double-sided tape (premium adhesive, long lasting and sticks on all surfaces). Is resistant to rain/snow, UV and washing (indirect high pressure jet and rollers).

Make sure you degrease the surface with a Gasoline type F solvent before applying it.
Specifications
  • Material : PVC
  • Thickness : 2.5 mm
  • Width : 9 mm
  • Length : 3 m
Radiator grill chrome moulding trim Nissan Qashqai 2 08102 phase 2 10142 phase 30710

Suggestions

4  black antitheft valve caps

4 % "black" antitheft valve caps These valve caps are fitted with an anti-theft system, there is therefore no more risk of leaving your valves without protection. Unlike some of our competitors, the screws used are in stainless steel and will not rust due to the rain, thus preventing removal. An Allen key is supplied with the valve caps, installation does not require any additional tools.Extra valve caps can be added for an additional 2€ per cap (there won't be any extra cost on shipping), please contact us.Shaped out of a single block, in an stainless aluminum alloy, these valve caps can not rust or tarnish over time (unlike some poor quality caps that oxidize and stick onto the valve). We recommend you to lubricate the valve before fixing them, to make it easier to remove if necessary.These valve caps can be fitted on all wheel rims of cars, motorcycles, scooters, quads, trikes... They contain a seal for optimum protection of the valve and to maintain proper tire pressure. Logos are supplied separately, you will have to stick them before assembly.

£0
4  hex antitheft valve caps

4 % "hex" antitheft valve caps These valve caps are fitted with an anti-theft system, there is therefore no more risk of leaving your valves without protection. Unlike some of our competitors, the screws used are in stainless steel and will not rust due to the rain, thus preventing removal. An Allen key is supplied with the valve caps, installation does not require any additional tools.Extra valve caps can be added for an additional 2€ per cap (there won't be any extra cost on shipping), please contact us.Shaped out of a single block, in an stainless aluminum alloy, these valve caps can not rust or tarnish over time (unlike some poor quality caps that oxidize and stick onto the valve). We recommend you to lubricate the valve before fixing them, to make it easier to remove if necessary.These valve caps can be fitted on all wheel rims of cars, motorcycles, scooters, quads, trikes... They contain a seal for optimum protection of the valve and to maintain proper tire pressure. Logos are supplied separately, you will have to stick them before assembly.

£0
4  striated antitheft valve caps

4 % "striated" antitheft valve caps These valve caps are fitted with an anti-theft system, there is therefore no more risk of leaving your valves without protection. Unlike some of our competitors, the screws used are in stainless steel and will not rust due to the rain, thus preventing removal. An Allen key is supplied with the valve caps, installation does not require any additional tools.Extra valve caps can be added for an additional 2€ per cap (there won't be any extra cost on shipping), please contact us.Shaped out of a single block, in an stainless aluminum alloy, these valve caps can not rust or tarnish over time (unlike some poor quality caps that oxidize and stick onto the valve). We recommend you to lubricate the valve before fixing them, to make it easier to remove if necessary.These valve caps can be fitted on all wheel rims of cars, motorcycles, scooters, quads, trikes... They contain a seal for optimum protection of the valve and to maintain proper tire pressure. Logos are supplied separately, you will have to stick them before assembly.

£0
RivetCovers for Licence Plate

Rivet-Covers for Licence Plate This Aluminium Rivets + Rivet-Covers Kit for licence plates will replace the rivets usually used. With this kit, your license plate will be attached with 2 rivets, and finished with the brand logo.You can complete your order with our rivet gun if you do not own one.

£0
Cigarette lighter

Cigarette lighter This cigarette lighter made in steel and aluminum will replace your original one to add an extra finishing detail inside your car. The brand logo is supplied separately, simply peel off the protection from the adhesive and stick it to the cigarette lighter.Please check the size of your original lighter for compatibility (diameter and length of the plug).

£0
Xenon Kit slim

Xenon Kit slim Xenon or HID (High-Intensity Discharge) bulbs have no filament unlike halogen bulbs. The brightness of a xenon bulb is 3 times better, for a 2 times lower consumption.The Xenon Kit will replace your original bulbs without modification on the support. The connections are made directly on the original wiring, and you may need to drill a hole in the headlight cover for the cables on some models (gasket supplied).Choose the bulb type

£0
Xenon Kit highend

Xenon Kit high-end Luxyline high-end kit with digital power supply: instant start, constant color, and long life. Comes in an aluminum protective case.Permissible Voltage: 9-16 voltsVibration Resistance Test: IEC 68-2-6Leak Test: EN60529Short-Circuit Test: 1000 times per minuteInterference Test: EMC CISPK22Xenon or HID (High-Intensity Discharge) bulbs have no filament unlike halogen bulbs. The brightness of a xenon bulb is 3 times better, for a 2 times lower consumption.The Xenon Kit will replace your original bulbs without modification on the support. The connections are made directly on the original wiring, and you may need to drill a hole in the headlight cover for the cables on some models (gasket supplied).Choose the bulb type

£0
Luxyline 3D carbon fiber vinyl wrap sticker

Luxyline 3D carbon fiber vinyl wrap sticker The Luxyline carbon fiber vinyl is a 3D-textured thermoformable vinyl sticker, which perfectly imitates the texture of the carbon fiber and offers excellent durability both inside and outside the car (UV and weather resistance, from -40°C to +70°C). The aspect of the carbon fiber is, either visually or to the touch, very realistic due to the light and reflexions effects that give a real contrast to all parts covered by this sticker.High quality foil having a thickness of 220 microns. The adhesive is directly inspired by 3M Technologies, with micro-grooves that help removing air bubbles without trouble during fitting.The adhesive also uses the "slow setting" Technology, which allows it to be repositioned several times without compromising its final bond. As for the thermoforming process, simply heat the foil with a hair dryer during installation. The foil can be up to 150% stretched. The fitting is very intuitive, everyone can do it!This product is perfect for use on the outside of the vehicle: hood, roof, spoiler, bumpers, rearview mirrors, handles, fuel flap... but also inside the car: inserts and dashboards, rods, handles, steering wheel, fairings...

£1,89